Solar Light Company designs and manufactures all of its UVC sensors.

There are many specialized sensors, including the new 360° viewing for multiple lamp monitoring, and we provide all of our sensors in a weather-proof housing that resists moisture and temperature extremes that may be present in the testing environment.

UVC Sensor only:

The sensors provide a 4-20mA or 0-5VDC output to the customer’s controller and the control or alarm logic takes place there.  The sensors require a driving voltage of 7VDC to 30VDC to operate.  This can be installed in an inexpensive fitting that uses standard threads or mounted in a standard housing via a screw onto a bracket inside the AHU or FCU housing. Used for air and water applications.

UVC Sensor and Remote Display:

The OEM display is remote mounted up to 50′ feet away from the sensor and displays the relative % output, and has an adjustable setting for the alarm.  It can connect to any of our 4-20mA UVC sensors.  Remote alarm via a set of N.O. or N.C. contacts, 10A, 120V or 220V, 5A.  110V or 220V input power.  See photo 1331a above- OEM customer’s logo, model number and name are blacked-out for confidentiality reasons.

UVC All-In-One Combination:

The unit measures UVC in close proximity to the lamp, displays the percentage of lamp life on the external portion of the unit, includes a reset button for 100% when a lamp is replaced, and provides a 120V/10A alarm output when the level reaches 65%, either normally open contacts or normally closed can be installed.  This input power is 120V.  It is possible to provide a remote cord for up to 3 meters away.

uv-test

Sensor with screw in fitting housing mount

- Measures in air

- Threaded installation

- Installed inside OEM               equipment.

- Water-resistant housing

- PMA1122 OEM shown

uv-test

Sensor with screw in fitting sensor mount

- Measures in air or water

- Threaded installation

- Installed inside OEM equipment.

- Water-proof housing

- PWA254 shown

uv-test

Sensor with bolted housing mount for waste water treatment

- Measures in air, narrow viewing window

- Installed inside customer’s quartz tube.

- Water-resistant housing

- PW254 STT shown

uv-test

Sensor with bolted housing mount for waste water treatment

- Measures in air, 360 degree viewing

- Installed inside customer’s quartz tube.

- Water-resistant housing

- PW254 360 shown

uv-test

All in one lamp monitor sensor and display combination with screw in fitting housing mount

- Measures lamp output % with remote alarm contacts, used in air or water

- Installed in port penetrating customer vessel or environment

- Water-proof sensor

- GLM10 shown

uv-test

Lamp monitor display with bolt housing mount

- Measures lamp output % with remote alarm contacts, adjustable, used in air or water

- Connects to remote sensor installed in port penetrating customer vessel or environment

uv-test

Lamp monitor display with 1/8 din panel mount housing and remote sensor

- Measures lamp output % with remote alarm contacts, adjustable, used in air or water

- Remote sensor installs into  customer provided fixture

- GLM100 shown (with remote sensor)