Applications

Semiconductor testing

Photovoltaic testing

Features

Reproduce Air Mass and other spectra using Xenon, Xenon-Mercury, or Mercury short arc lamps
Standard and customizable solar simulators meet FDA, ASTM, ANSI, ISO, and IEC test protocols
Optional filters allow for user changeable spectra
UV and Air Mass 0 and 1.5 spectra available

Square beam size of 4", 6", 8", 10", 12"
Round beam size of 2", 4", 6", 8", 10", 12"
Beam uniformity across illuminated area better than +/- 5%
High efficiency, 1000 watt regulated switching power supply with adjustable current for variable intensity

Internal electric shutter
Ellipsoidal mirror captures up to 85% of lamp output
Forced air cooling system
Available with precision dose control system

Specifications

Optional Spectra outputs:

spectra of UV and Air Mass 0, 1, 1.5, and available

Illuminated Area:

Vertical, round diameters from 2 to 10 inches and square from 4 to 8 inches.

Light source:

Choice of Xenon short arc or mercury xenon short arc lamps

Lamp lifetime:


approx. 900 hours

Uniformity:
±5%

Collimation:


<4° half angle.

Weight:

35 - 45lbs (depending on model)

Dimensions (LxWxH):

23.75x10.5x20.25" (60.3x26.7x51.5cm) [4S and 6R models]
28.0 x10.5x20.25" (71.1x26.7x51.5cm) [6S and 8R models]

Line Voltage:

220V AC
1Ph
50/60 Hz
Packages

LS1000-6S-005

includes: LS1000-6S Air Mass 1.5 Solar Simulator with 6" square vertical downward output
XPS1000 Power Supply
Literature

• PV CELL TESTING SOLAR SIMULATOR • LS1000-005 Simulators_LS1000-6R-005.pdf

Downloads

Dose Control System
The Dose Control System is an integral part of conducting precision sunlight exposure testing. The Dose Control System allows the monitoring and controlling of the output of the LS1000-002. It accumulates the amount of light being outputted and alerts you when your preset dose has been reached. This features allows you to expose a precise amount of light to the solar cell.
Laboratory Scissor Jack, 6"x6" surface, 2.25" to 11" height

Dose Controller/Meter DCS 2.0
Included Accessories
XPS Power Supply
Xenon Lamp
Required Accessories

1 year Standard Warranty

SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects.  SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty.  Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components.  The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period.  Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser.  Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER.