Applications

Sun Tanning Bed Monitoing and Measurement

Features

Ease of use

The SL-3201 automatically configures itself for the new sensor when connected. No entering programs and calibration factors. The detector setup and algorithms are encapsulated in the detector. The detector is ready to use out of the box.

Portability

The SL-3201 with its powerful features easily fits into the palm of your hand. Up to 2 detectors can be connected simultaneously via a 1ft/5ft cable enabling easy measurements. Rechargeable batteries allow for 30 hours of continuous operation.

Data Logging

Up to 1024 data records can be stored in the internal non-volatile memory. The storage can be triggered manually or automatically in a user-set interval (1 minute-2 hours). Uniform record structure for all detectors simplifies data management.

Traceability

Each data sample is accompanied by a set of auxiliary information such as: date, time, detector type and serial number, currently used units, user set scale factor, detector calibration due date and a set of flags indicating the state of the meter. This encourages an implementation of Good Laboratory Practices (GLP) and eases interfacing to Laboratory Information Management Systems (LIMS).

Noise immunity

The signal amplification is done inside the detector encapsulated in a metal enclosure. The signal is delivered to the PMA2100 through a shielded cable offering high immunity to EMI and ESD.

Automatic unit conversion

The measurement result can be displayed in one of many units customary for the particular measurement. A push of a button changes the unit selection. Custom units and conversion algorithms can be programmed to the detector on request. Dose integration. A dose integration can be started from the keypad or remotely.

Computer interface

Connection to a PC through a USB interface enables transfer of collected data. PMA Organizer, a Windows-based software facilitates data retrieval, archiving and presentation.

User defined alarms

An independent alarm can be set for the instantaneous value or integrated dose for each detector. The alarm settings are stored in the detector and automatically recalled when the detector is in use.

Isolated Digital Input/Output

A process can be controlled by the SL-3201 through the optically isolated digital I/O. The inputs can start or stop the dose collection while the outputs are triggered by the dose and value alarms. Controlling the dose of radiation to a subject is one possible application. Power relay is available as an accessory.
Specifications
Meter Specifications: UVB (SUV) Readout range 0...19.99 MED/Hr UVC Readout range 0...19.99 mW/cm2 Resolution 0.01 MED/Hr or mW/cm2 Operating temperature 0 to +50°C Dynamic range: >2*105 Accuracy: 0.2% FS all ranges Nonlinearity: max 0.02% FS within each range Temperature coefficient: max 50 ppm/°C Operating temperature: 0 to 50°C Power source: 4xAA NiCd or Alkaline batteries; external 9-12V AC or DC adapter Weight: 17 oz (480 grams) Size: 4"W x 7.6"H x 1.75"D (10x19.5x4.5 cm)
UVB DETECTOR SPECIFICATIONS Spectral response 280 to 320 nm Cosine response 0-60 degrees +/- 5% Connector 1/4" plug Operating temperature -10 to +60°C Weight 1.6 oz. (45 grams)
UVC DETECTOR SPECIFICATIONS Spectral response 275 to 285nm Cosine response 0-60 degrees +/- 5% Connector 0.141 " plug Operating temperature -10 to +60°C Weight 1.2 oz. (34 grams)

1 year Standard Warranty

SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects.  SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty.  Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components.  The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period.  Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser.  Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER.