Applications

Laboratory and industrial radiometry Phototherapy

Environmental monitoring
Material testing

UVB transmission measurements Agriculture

Features

High sensitivity
Dynamic range 2*105
Excellent long term stability
Cosine corrected
NIST traceable calibration

Specifications

PMA1106 UVB SENSOR
Angular response:

5% for angles <60°

Range:

20 [mw/cm2], 200 [W/m2]

Display resolution

0.001 [mw/cm2], 0.01[W/m2]

Operating environment:

32 to 120 °F (0 to +50 °C) no precipitation

Temperature coefficient:

1% /°C for solar radiation

Cable:

5ft (1.5m)

Diameter:

1.6" (40.6 mm)

Height:

1.8" (45.8 mm)

Weight:

7.1 oz. (200 grams)
PMA1106 Spectral Response

PMA1106B UVB SENSOR
Range:

200 [mW/cm2], 2000 [W/m2]

Display resolution:

0.001 [mW/cm2], 0.01 [W/m2]
Literature

• UVB SENSOR, NON-WEIGHTED, PMA 1106 AnalogSensors_PMA1106-.pd

Downloads

Wiring Diagram for Analog Sensors
Sensor and Detector Options
Solar Light offers sensor and detector options for use in a wide range of applications.
Sensor and Detector Options
Sensors must be used with a datalogger or recorder.
Included Accessories
Required Accessories

1 year Standard Warranty

SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects.  SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty.  Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components.  The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period.  Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser.  Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER.