Solar Light can create a PMA1181 Custom Digital Sensor for virtually any wavelength and bandwidth. Bandwidth with up to two filters to tailor the spectrum. Please contact us with your specific requirements. Custom sensors are our specialty!
Solar Light can create a PMA1181 Custom Digital Sensor for virtually any wavelength and bandwidth. Bandwidth with up to two filters to tailor the spectrum. Most configurations will come with a teflon dome diffuser. Some configurations will require a different type of diffuser. Please contact us with your specific requirements. Custom sensors are our specialty!
0.4” (1 cm) |
Vertical Downward, Vertical Upward, or Horizontal (for all models - please specify at order) |
Xenon Short Arc (For All Models) |
150W (For All Models) |
±5% (For All Models) |
A (IEC 60904-9 2007)<br> A (JIS C 8912)<br> A (ASTM E927 - 05) |
< ±2% rms |
B (IEC 60904-9 2007)<br> B (JIS C 8912)<br> B (ASTM E927 - 05) |
3” (7.6 cm) |
n/a |
Near Zero |
Factory Set Limit is 150 watts max |
32°F to 95°F / 0°C to 35°C |
-4°F to 185°F / -20°C to +85°C |
0 to 95% non-condensing |
Forced air |
EN61010-1 Laboratory, EN60335 Appliances, IEC60601-1 Medical |
EN55011 Emissions, IEC60601-1-2:2001, 2nd Rev 2 Medical, IEC61000-3-2 Harmonic, IEC61000-3-3 Flicker, IEC61000-4-2 ESD, IEC61000-4-3 Radiated, IEC61000-4-4 EFT, IEC61000-4-5 Surge, IEC61000-4-6 Conducted, IEC61000-4-11 Voltage Dip, IEC61000-4-8 Magnetic Field |
CUSTOM BROADBAND SENSOR PMA1181
SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects. SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty. Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components. The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period. Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser. Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER. Extended Warranty Plans are also available.
To access our guide to performing ISO 24443:2021 In Vitro UVAPF Measurements, please fill out the form below.
To access our guide on Polychromatic and Monochromatic Diffuse Reflectance Spectroscopy, please fill out the form below.
To access our white paper on horticultural light measurement devices, please fill out the form below.
To access our UVGI white paper PDF, please fill out the form below.
