Description
Our state of the art single output 16-Series Solar Simulators produce solar UV radiation in the 290-400nm range, and can be quickly and easily configured by the user to provide UVA only, UVB only, UVA+B, or full spectrum sunlight optionally. This simulator can output 1 year’s worth of UV in as little as 5 days (depending on spot size,) providing rapid acceleration test results.
These precision research-grade instruments are specifically designed to comply with laboratory standards such as ASTM, IEC, and ISO. By eliminating the visible and infrared light from its output, UV levels 20-30 times stronger than tropical sun can be produced without the thermal component associated with these high levels of light. This is ideal for measuring the damaging effects of UV during materials testing. Everything you need to begin testing immediately is included in the kit – the 16S-Series 150W Simulator, DCS-2 Automatic Dose Controller, NIST-traceable PMA-Series UVA+B Sensor, safety glasses, and other accessories.
Plastics testing is one of the most common tests carried out because of the abundance of plastic found in the outdoor environment, such as garden furniture, artificial surfaces, house trims, outbuilding doors, window frames, and much more.
1 YEAR STANDARD WARRANTY
SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects. SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty. Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components. The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period. Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser. Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER. Extended Warranty Plans are also available.
%20150W%20Plastics,%20Paints%20&%20Coatings%20Testing%20Solar%20Simulator%20Kit%20Model%2016S-150-003){kind=link}