-
Model PMA1112 Analog High Intensity UVA Sensor Probe
Read moreSolar Light’s Model PMA1112 Analog High Intensity UVA Probe is a useful tool for UV curing applications. It measures UVA radiation in the range from 320-400nm (with peak sensitivity at the 365nm mercury emission line) via a diffuser mounted at the end of its 18″ (45.7 cm) probe. The light is delivered to the sensor through a quartz light guide encapsulated in a metal envelope inside the probe, making it suitable for high temperature applications up to 400°C.
-
Model PMA1120 Analog UV Radiation Safety Sensor
Read moreSolar Lights Model PMA1120 Analog UV Radiation Safety Sensor indicates how long a worker may remain at the measured position before reaching the threshold limit value (TLV) proposed by the American Conference of Governmental Industrial Hygienists (ACGIH) published guidelines.
-
Model PMA1121 Analog Blue Light Safety Sensor
Read moreSolar Light’s Model PMA1121 Analog Blue Light Safety Sensor indicates the effective irradiance weighted by the American Conference of Governmental Industrial Hygienists (ACGIH) Spectral Weighting Function for Blue Light Hazard.
-
Model PMA1122 Analog Germicidal UVC Sensor
GET A QUOTESolar Light’s Model PMA1122 Analog Germicidal UVC Sensor provides fast and accurate irradiance measurements of the effective germicidal radiation.
-
Model PMA1123 Analog Bilirubin Phototherapy Sensor
Read moreSolar Light’s Model PMA1123 Digital Bilirubin Phototherapy Sensor is an accurate, stable sensor designed to measure the output of phototherapy lamps used in neonatal wards to treat infant hyperbilirubinemia (jaundice.)
-
Model PMA1130 Analog Photopic Light Sensor
Read moreSolar Light’s Model PMA1130 Analog Photopic Light Sensor is a portable Lux detector with a spectral response following the CIE Photopic Luminous Efficiency Function (which mimics the human eye’s response in the visible region) and following the SI definition of 683 lm/W at 555 nm.
-
Model PMA1131 Analog Scotopic Light Sensor
Read moreSolar Light’s Model PMA1131 Analog Scotopic Light Sensor is a portable Lux detector with spectral response following the CIE Scotopic Luminous Efficiency Function (which mimics the human eye’s response in low light conditions).
-
Model PMA1132 Analog Quantum Light (PAR) Sensor
Read moreSolar Light’s Model PMA1132 Analog Quantum Light (PAR) Sensor measures the photon flux in wavelength range from 400 to 700 nm. There is a proportional relationship between the number of photons absorbed in 400 to 700 nm band and the rate of photosynthesis in plants.
-
Model PMA1133 Analog Luminance Probe
Read moreSolar Light’s Model PMA1133 Analog Luminance Probe accurately measures luminance according to the CIE photopic luminous efficiency function, which mimics the the human eye’s visual response in the photopic region.
-
Model PMA1140 Analog IR and Visible Light Global Sensor
Read moreSolar Light’s NIST-Traceable Model PMA1140 Analog Visible and Infrared global radiometer measures irradiance within the range of 400-1100nm, and is intended primarily for cost-sensitive applications where the flat spectral response of our thermopile-based pyranometers is not required.
-
Model PMA1142 Analog Laser Sensor
Read moreSolar Light’s Model PMA1142 Digital Laser Sensor is available in two full scale power levels of 10 watts (Model PMA1142-10,) and 40 watts (Model PMA 1142-40.) PMA1142-10 has an active area of 3.14 cm2, and the PMA1142-40 has an active area of 4.91 cm2.
-
Model PMA1180 Analog Custom Band Sensor
Read moreSolar Light can create a PMA1180 Custom Analog Sensor for virtually any wavelength and bandwidth. Bandwidth is given as the Full Width at Half Maximum Response. If you don’t see what you require here on our site, please contact us. Custom sensors are our specialty!
-
Model PMA1181 Analog Custom Broadband Sensor
Read moreSolar Light can create a PMA1181 Custom Digital Sensor for virtually any wavelength and bandwidth. Bandwidth with up to two filters to tailor the spectrum. Please contact us with your specific requirements. Custom sensors are our specialty!
-
Model PMA2103 Digital Biologically Weighted Erythema UVB Sensor
Read moreSolar Light’s Model PMA2103 Digital Biologically Weighted Erythema UV Sensor provides an accurate measurement of biologically weighted UV radiation from Solar Light’s Solar Simulators. Special mounting hardware allows direct coupling with 8mm Liquid Light Guides (LLGs.)
-
Model PMA2105 Digital UVB Sensor With Beam Splitter Adapter
Read moreSolar Light’s Model PMA2105 Digital Biologically Weighted Erythema UV Sensor With Beam Splitter Adapter allows direct coupling with the beam splitter on the subject stop available for our legacy 15S-Series and modern 16S-Series Solar Simulators. The sensor’s spectral response closely follows the Erythema Action Spectrum.
