UV Sensors, Solar Sensor & Detector Selection Guide | Solar Light

Sensor Selection Guide

Add to Wishlist
GET A QUOTE
Category:

Description


UVA Sensors
UVA only
PMA2112 UVA high intensity probe
PMA2113 UVA with Liquid Light Guide adapter
PMA2114 UVA with beam splitter adapter
UVB Sensors
PMA2101 UVB erythemally weighted
PMA2103 UVB with Liquid Light Guide adapter
PMA2105 UVB with beam splitter
PMA2106 UVB only
UVA + UVB Sensors
PMA2107 UVA+ UVB Sensor
UVC Sensors
PMA2120 UV radiation safety detector
PMA2122 Germicidal UV detector
Visible Sensors
PMA2121 Blue light safety detector
PMA2123 Bilirubin phototherapy detector
PMA2130 Visible Photopic
PMA2131 Visible Scotopic
PMA2132 Visible photosynthetically active radiation
Photostability Sensors
PMA4100 CALReady™ Sensors
Infrared and Full Spectrum Sensors
PMA2140 IR and visible global radiometer
PMA2144 Solar Sensor class II Pyranometer
PMA2145 Solar Sensor class I Pyranometer
PMA2142-3 Full spectrum 3 watt laser power detector
PMA2142-10 Full spectrum 10 watt laser power detector
PMA2142-30 Full spectrum 30 watt laser power detector
Temperature Sensors
PMA2161K Thermistor surface temp. probe w/ interface
PMA2162K Thermistor miniature temp. probe w/ interface
PMA2163K Thermistor immersible temp. probe w/ interface
PMA2164K Thermistor S.S Air/Gas temp. probe w/ interface
PMA2165 J or K-type therocouple probe
PMA2170 Relative humidity, dewpoint & temp. probe
Custom Wavelength Sensors and Detectors
PMA2180 Custom narrow band detector with specific filter

Our state of the art single output 16S- Series Solar Simulators produce solar UV radiation in the 290-400nm range, and can be quickly and easily configured by the user to provide UVA only, UVB only, UVA+B, or full spectrum sunlight optionally.

This field can't be Empty

0.4” (1 cm)

This field can't be Empty

Vertical Downward, Vertical Upward, or Horizontal (for all models - please specify at order)

This field can't be Empty

Xenon Short Arc (For All Models)

This field can't be Empty

150W (For All Models)

This field can't be Empty

±5% (For All Models)

This field can't be Empty

A (IEC 60904-9 2007)<br> A (JIS C 8912)<br> A (ASTM E927 - 05)

This field can't be Empty

< ±2% rms

This field can't be Empty

B (IEC 60904-9 2007)<br> B (JIS C 8912)<br> B (ASTM E927 - 05)

This field can't be Empty

3” (7.6 cm)

This field can't be Empty

n/a

This field can't be Empty

Near Zero

This field can't be Empty

Factory Set Limit is 150 watts max

This field can't be Empty

32°F to 95°F / 0°C to 35°C

This field can't be Empty

-4°F to 185°F / -20°C to +85°C

This field can't be Empty

0 to 95% non-condensing

This field can't be Empty

Forced air

This field can't be Empty

EN61010-1 Laboratory, EN60335 Appliances, IEC60601-1 Medical

This field can't be Empty

EN55011 Emissions, IEC60601-1-2:2001, 2nd Rev 2 Medical, IEC61000-3-2 Harmonic, IEC61000-3-3 Flicker, IEC61000-4-2 ESD, IEC61000-4-3 Radiated, IEC61000-4-4 EFT, IEC61000-4-5 Surge, IEC61000-4-6 Conducted, IEC61000-4-11 Voltage Dip, IEC61000-4-8 Magnetic Field

This field can't be Empty

1 YEAR STANDARD WARRANTY

SOLAR LIGHT COMPANY warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects.  SOLAR LIGHT COMPANY warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty.  Defective parts replaced under this warranty shall become the property of SOLAR LIGHT COMPANY. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized SOLAR LIGHT COMPANY representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with SOLAR LIGHT COMPANY’s operating instructions, maintenance instructions and specifications. Utilization of only SOLAR LIGHT COMPANY’s authorized parts and components.  The utilization of a duly authorized representative for all work performed on SOLAR LIGHT COMPANY equipment during the warranty period.  Any variation(s) to the above warranty must be in writing and mutually acceptable by SOLAR LIGHT COMPANY and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser.  Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SOLAR LIGHT COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER. Extended Warranty Plans are also available.

Related products